NEW Truk 'COLORADO' Heavy Recovery Equipment Range

'Colorado' Underlifts:

• Most popular model has 4.3m Ultra Long & Low Underlift with 9 tonnes capacity at 4.3m reach and a third extension height of only 130mm - No other Underlift that we are aware of reaches further or lifts more

'Colorado' Underlifts with Overhead Winching Booms:

• Most popular model has 25 tonne capacity Overhead Winching Boom with 4.3m reach and a maximum height under the hook of 6.54 meters and our 4.3m Ultra Long & Low Underlift with 9 tonnes capacity at 4.3m reach and a third extension height of only 130mm

• 45 tonne capacity with 3 stage extending Overhead Winching Boom available

'Colorado' 360 degree Rotators with Separate Underlifts:

• 40 & 60 tonne Rotators available with choice of Underlifts including our 4.3m Ultra Long & Low model

All Models Available Installed or in Kit Form with Stainless Steel or Aluminum Bodies

Truk's engineers have been working on the introduction of these new models for the past two years. The new Truk 'Colorado' models range from a 3 tonne capacity Underlift that is available with or without a crane boom, all the way up to our current largest model the 60 tonne 'Colorado' R60, a continuous 360° Rotator.

Our new 'Colorado' CB25 with its 4.3m extending crane boom and integral U21 4.3m Ultra Long & Low Underlift is likely to be one of the most popular models offering, as all our 'Colorado' models do,  a great specification at a very competitive price. If our U21 4.3m Underlift with a retracted capacity of 21 tonnes and a fully extended one of 9 tonnes, together with a third extension height of only 130mm, isn't powerful enough for you, we have other more powerful ones available as options. Like all our Colorado Heavy Recovery Equipment it's available in kit form or installed, and with or without a stainless steel or aluminum body. The CB25 body has a three step side profile and is fitted with our new futuristic swept back Delta flyer.

Our new continuous 360° Rotators, the 40 tonnes capacity R40, and 60 tonne capacity R60, enable customers to have a Rotator for a lot less money than they have had to pay in the past. For example, for about the same price as you would expect to pay for a high quality but ordinary "can only lift over the back" Heavy Crane / Underlift you can now have one of our very powerful 'Colorado' 40 tonne continuous 360° Rotators with a stainless steel or aluminum body fully installed to a very high specification with a lot of what other manufacturers offer as options fitted as standard.

Like all of our products the new 'Colorado' range offers high quality feature packed products at very competitive prices.